"How to measure for curtains" is searched in the UK over 12,000 times a month, and it's easy to see why: get it wrong and you end up with curtains that won't close, or that stop awkwardly halfway down the wall. The good news is that you only need two measurements. Here's how to take them, plus straight answers to the questions people ask most.
What you need
- A steel tape measure (a fabric one can stretch)
- A step ladder
- A pencil and paper, and a helper for wide windows
Step 1: Put the pole or track up first
Measure the pole or track, not the window. If you haven't fitted one yet, a good starting point is 10–15 cm above the window frame, extending 15–20 cm beyond each side. That extra width lets the curtains sit clear of the glass when open, so you don't lose daylight. Hanging the pole higher, closer to the ceiling, makes a room feel taller.
Step 2: Measure the width
- Pole: measure the length of the pole between the finials (the decorative ends). Don't include the finials.
- Track: measure the whole track from end to end. If it has an overlap in the middle, add the overlap too.
How wide should curtains be?
Curtains need extra fabric to fall in soft folds when they're closed. As a rule of thumb, a pair of curtains should add up to about twice the width of your pole or track, so each curtain is roughly the width of the pole. Eyelet curtains can go a little flatter (about 1.5 times); pencil pleats look best fuller (2 to 2.5 times). Voiles and sheers look good at about twice the width.
Example: your pole is 150 cm between the finials. A pair at twice the width is 300 cm in total, so each curtain wants to be about 150 cm wide.
Step 3: Measure the drop (length)
Where you start depends on the heading:
- Eyelet curtains: measure from the top of the pole down to where you want the curtain to finish. The rings sit around the pole, so the fabric starts just above it.
- Pencil pleat on a pole: measure from the eye of the curtain ring (the small loop the hook goes into).
- Pencil pleat on a track: measure from the top of the track.
Floors and ceilings are rarely level, so measure the drop in three places across the window and use the shortest.
How long should curtains be?
- Sill length: finish about 1 cm above the windowsill. Neat, and the usual choice in kitchens and bathrooms.
- Below the sill: finish about 15 cm below the sill. Good where there's a radiator under the window.
- Floor length: finish about 1 cm above the floor, so the hem doesn't drag and mark. This is the most elegant option in living rooms and bedrooms.
- Puddled: a few centimetres extra resting on the floor. Romantic, but it collects dust, so it's best kept to rooms with little foot traffic.
Should curtains touch the floor?
Almost, but not quite. A centimetre's gap looks deliberate and stops the hem wearing. If there's a radiator under the window, either stop the curtains just above the radiator (below-sill length) or tuck floor-length curtains behind it only if they'll be open most of the time. Curtains hanging in front of a radiator trap its heat behind them.
Which ready-made size should I buy?
Ready-made curtains in the UK come in three standard widths and three standard drops, and the width is for each curtain in the pair:
- Widths: 117 cm (46"), 168 cm (66") and 229 cm (90")
- Drops: 137 cm (54"), 183 cm (72") and 229 cm (90")
As a rough guide, a 117 cm-wide pair suits a pole of up to about 150 cm, a 168 cm pair up to about 220 cm, and a 229 cm pair up to about 300 cm. Pick the drop that's closest to your measurement without being too short; a few centimetres extra is easier to live with than a gap.
Eyelet or pencil pleat?
- Eyelet curtains have metal rings punched into the top and thread straight onto a pole. They hang in deep, even folds and glide open easily. They need a pole, not a track. A modern, relaxed look.
- Pencil pleat curtains have a tape across the top that you pull to gather the fabric, then hang with hooks from a track or from rings on a pole. The gathered top is more traditional and lets you fine-tune the width.
If you're after blackout, both work, but pencil pleats on a track that runs right to the ceiling, or a pole that extends well past the window, let less light creep round the edges.
Measuring a bay window
Measure each straight section of the track separately, from corner to corner, then add them together for the total width. Measure the drop at each section too, because bay ceilings often slope. Curved bay tracks suit pencil pleat curtains; eyelets need a pole with angled bay joints.
Can you put curtains in the washing machine?
Many can, but always check the care label first: lined and blackout curtains can shrink or lose their coating at high temperatures. Take out the hooks (or check the eyelets are rust-proof), wash on a cool, gentle cycle and hang them back on the pole while still slightly damp, so the folds drop out. Our Velvet Room-Darkening Curtains are machine washable.
A quick checklist
- Fit the pole or track first: 10–15 cm above the window, 15–20 cm past each side.
- Width: measure the pole between the finials (or the whole track). Each curtain should be about the width of the pole.
- Drop: eyelets from the top of the pole; pencil pleats from the ring's eye or the top of the track.
- Finish 1 cm above the sill, 15 cm below it, or 1 cm above the floor.
- Measure in three places and use the shortest.
Ready to choose? Our Linen-Look Sheer Voile Curtain filters daylight and keeps a room private, in eyelet or pencil pleat, and our Velvet Room-Darkening Curtains come in seven widths with four heading styles. For the rest of the room, see our living room and bedroom collections.